Bias Binding and Rolled Hemmer Set (Snap-On to suit 7mm and 5mm machines)

Click to view larger images or other views or videos

Swipe for more. Tap to enlarge

Click to view larger images or other views or videos

Bias Binding and Rolled Hemmer Set (Snap-On to suit 7mm and 5mm machines)

In Stock
AU $79.99
SAVE AU $10.00 (12%)
AU $69.99
or 4 payments of AU $17.50 learn more
or scroll down to read more

Dressmaker's Secret Exposed:
Perfect Binding & Hemming on your project
Done Easily & Quickly every time!

Read on to find out more...


Are you
sick of avoiding sewing projects that call for bindings or rolled hemming...
because you don't know how? 

Despite your best attempts.... Have you found that bias bindings seem to have a will of their own
and won't go where you want them? 

Or even worse:  that ever-growing pile of pants / skirts / whatever that need rolled-hemming...
because you're just not in the mood for hand-sewing? 

How many times can you unpick a failed project without pulling your hair out?

Most of us have experienced this... sometimes all too often!

We all LOVE professionally finished rolled or double-folded hems, and anything done with bias binding - because it just takes your garment to the next level of awesomeness!

Whether you're creating your garment from scratch, or simply needing to alter and improved on your existing wardrobe, you KNOW the sort of finishing you want to achieve - after all, it's always the little details that make a world of difference, transforming ordinary to having a designer touch. Right?

Except.... trying to finish your garments with such finish can be hit and miss. That means LOTS of unpicking!


Ask anybody who sews.....

There's NOTHING more annoying than having to pin down your bias binding or narrow hems a million times.....

.....especially 
when you go to sew them. OUCH!
 
What would it be like to NEVER have to unpick a poorly attached binding or wonky rolled hem....

..... and No more "ouch" moments from pin pricks (see below. Looks familiar?)... ever again?


  


What if finishing garments with binding or rolled hem was easier than you think?


Imagine being able to finish ALL your edges neatly & professionally, on your own machine,
done easily, quickly, and with Great Results EVERY TIME because you know how!

Often the hard part is to come up with exactly the right tool, for the right job, at the right price.


 

"I have used all these attachments for several weeks now; since I am new to sewing I took my time in learning how to use them.

First of all they are well-made, apart from the binder foot, they are all metal, smooth and sturdy.

I have a Brother machine and they fit perfectly. Just snap the foot on and off you go!

The rolled hem attachments are awesome, a must have. Your hems come out perfect and you have three sizes to choose from!

The binder foot was a little tricky to use at the start, but that was my lack of experience . After a few practice runs I got the hang of it.

Overall, they are very nice and do their job well. I can't believe how professional my work looks now!"

- Jan, a Happy Customer



As a formally trained Fashion & Textile Designer, I know how important it is to create perfect finishings with the minimum amount of effort - afterall, when you sell clothes for a living, there is simply NO room for dodgy finishing on hems and edges!

So I know that how much easier it will be for you to create beautiful results with less frustration and physical discomfort simply by having the right tools for the job. After all... we all want to have fun enjoying our hobby and rather than struggling and swearing... right?

The Secret Weapon that takes the stress out of binding and hemming is a Universal Adjustable Binding & Hemming Set (this is the clip-on or snap-on version).



This Rolled Hem & Bias Binding Set is ideal for finishing all hems and edges.

The full name is "Universal Adjustable Binding and Rolled Hemming Presser Feet Set".


A VERY versatile tool, this set will give you FOUR different feet...!

The clear bias binding foot puts bindings around the cut edge of the fabric (often a contrast colour, might even be in completely different weight / type).


Take the clear binding feeder off, there are THREE metal folders to choose from:



4/8"
of an inch (1.3cm or 13mm)

6/8"
of an inch (1.9cm or 19mm)

8/8"
of an inch (2.5cm or 25mm)

These are your FINISHED hem measurements!





Using this set ensures your binding and hems are always neat and professional-looking; without any hand tacking or excessive pinning.

This Binder & Hemmer Set is the perfect partner for your Janome Computerised Sewing Machine, such as a Janome 19110 (which we also sell. See our other listings).

This foot also fits your Basic Front Loading Janome models, such as Janome RE1306 (available from K-Mart).

Best of all, it will even fit your embroidery models with High Shank - as long as it takes clip-on or snap-on feet!


Designed to fit ALL Janome Models (and other makes), it has been made to equivalent specification by a reputable manufacturer and it has the same quality workmanship.




T
his bias binding foot looks different - isn't there one with ALL metal?

You may have seen other type of binding foot that has a "cone" shape, and the whole thing is made of metal?

Well, Here's what a budding seamstress finds when she tried on the "cone" type:

 

"I was so excited about my new binding foot with a metal cone, I couldn't wait to test it out... but I was soooo disappointed....it's not adjustable so only one width of binding can slot into it.
 
That means I'm stuck to work with just one size binding!

So, determined not to let this set back deter me, I went directly to eBay and ordered one. My new adjustable foot arrived and it's soooo easy to use and I love it!"

- Angela, a Happy Customer



What makes this feet set "universal"? How does it adjust?


Take a closer look, you will see two adjustable screws or "dials" on the binding foot.

The screw or "dial" closest to the red marking is where you can make adjustments to suit the width of your binding (which has been pressed into its finished size ready to go).

As you move the screw or "dial" in or out, you will see the slot in front of the presser foot change size...

This is the slot where you "feed" your binding through.

The red markings are in millimeters (mm), so it's easy to adjust it to suit bindings with widths that ranges from 5mm to 18mm (see note below)*.... this means you're covered for most sewing projects imaginable!

 

And here are some of the best kept secret to impposibly neat rolled hems (in wider width than your standard narrow hem)!!

With no hand sewing required, you will be amazed at how much you can do by machine!

Sure, there are LOTS of different methods of finishing your raw edges - you can blind hem, overlocked and then fold over twice, use a contrast fabric, or even leaving it raw....

But there are many cases where you simply cannot beat a classic rolled hem - all smooth, neat, and incredibly professional looking. Your handmade garments will no long look "home-made"!!

 





While the RED markings on the bias binding foot show 5-10-15-20mm, the maximum binding width it can do is 17-18mm.

 
So if you absolutely NEED to make 20mm (2cm) bindings, then this foot will NOT go that far (not sure why they put the marking there in the first place).

The maximum measurement is in fact 17-18mm (which covers most store-bought binding widths anyway).



How to use the metal rolled hem feeders?


Get your binding foor and simply take the screw off the foot itself (you will be left with the actual foot and one screw, see above). Next, choose a metal feeder out of the three sizes (see below), and slide the "arm" of the metal feeder onto the horizontal metal bar on the right hand side of the foot.




Put the screw back in place, adjust the metal feeder left or right until you find the perfect position for the job at hand (you might want to do this with the foot on the machine). Once you're happy with the position, tighten the screw, clip the foot on you machine, and get sewing. It's that simple!

 

How do you work out the correct binding width & adjust the foot accordingly?


First, measure your binding folded, as if it is already finished. That's your binding width.


The true "reading" should be at the end of the screw (you can see it through the plastic), and NOT the faint line which is the edge of the plastic guide (they looks like two little triangles when you look at the foot from the front). Hope you can see from the picture above....

So when you adjusted the foot to the maximum it will go, it actually looks like there is a line that stops at just over 10mm (that's the faint line mentioned above), but if you look at it from the front (where the bindings go in), there is more room for a wider binding.

The end of the screw finishes a bit over the 15mm marking. It won't go any further because there is no more thread on the screw. So does that mean you can only do bindings up to 15mm wide? Not necessarily.

If you measure the actual slot width, from the little folded "lips" on the left hand side to the end at the right hand side, and the maximum measurement is in fact 17-18mm (which covers most store-bought binding widths anyway).





Now, what does that other screw or "dial" do?



It determines the needle position, in relation to where your stitching goes on your binding or hems.

Would you like it really close to the edge? Or a bit further?

You can change this by adjusting this screw / dial and move the clear feeder left or right to suit, or if your machine allows change your needle position instead.



Ok, binding folded ready to go. What to do next?



Now, feed your binding through the slot....


 



..... and insert your fabric BETWEEN the opening of your binding and start sewing.



It's as simple as that!
 



TIP:
You might find it easier if you feed the binding through the slot BEFORE installing the foot on your machine.

This method may or may not suit your project, because each fabric is different. Give yours a try.....


 

So, How Much Would YOU Expect to Pay for this Set?

Not nearly as much as you think.....


What You Get Normally This Pack
Adjustable Bias Binding Foot $ 39.99 Photobucket Included
Hemmer Folder 4/8" (13mm) $ 29.99 Photobucket Included
Hemmer Folder 6/8" (19mm) $ 29.99 Photobucket Included
Hemmer Folder 8/8" (25mm) $ 29.99 Photobucket Included

Total Value

$129.96
 
Plus Super Bonuses... See Below...
 



 



This foot goes onto your machine just like any other clip-on or snap-on presser foot.

It is designed to fit most brands of domestic sewing machines.


A Binder and Rolled Hem Foot will give your work a professional finish.






Keen To Try It Out For Yourself?

I'm so sure that you are going to love your new Universal Adjustable Binding and Hemming Feet Set, that I am willing to completely guarantee it... so you'll be able to try it out for yourself and see first hand how much of a difference it makes absolutely risk free!

I will tell you more about the guarantee in a moment..

But first, as a special thank you for buying from us, you will receive the following super bonuses:

Super Bonus Number 1 - Be Kept in the Loop for any Specials and Limited Offers

From time to time we come across great products and share specials deals exclusively with our valued customers. By purchasing from us you are automatically a valued part of our community. Enjoy!

Super Bonus Number 2 - Valued at $275, Yours FREE!

5 Personal emails to me (Shelley) - Gain expert advice from your online fashion design, quilting and sewing craft expert. Ask me your most burning questions for anything to do with how to use your walking foot, sewing, patchwork and colour selection. What better opportunity than being able to communicate one on one with someone qualified to give you the right advice? This alone makes this an outstanding offer unique anywhere!







Grab yours now and you can experience:

  • Create neat edges consistently...... Absolutely Stress-Free!
  • Get your project Done On Time for that special occasion: whether it be a birthday, anniversary, or wedding!
  • Save bucket loads of Money by avoiding costly mistakes - so you can go fabric shopping (YAY)!
  • A sense of achievement, because you've made something with a professional method.
  • No more piles of unfinished projects - instead, you will churn out lots of goodies for your family to enjoy this Christmas!
  • A professional finish to everything you've made - your friends will be dying to know your secrets.....

Why Wait?.. Simply Scroll Up And Buy Yours Now!
    

What's more.... the money you invest in this essential tool is nothing to how much more you'll enjoy your hobby with your new found secret weapon...





Plus, you can now experience the difference of Universal Adjustable Binding and Rolled Hemming Feet Set for yourself absolutely risk free. I know you'll be glad you did. Here's how...


Your No-Nonsense 60 Day
100% Money Back Guarantee...

This item comes with our No-Nonsense, 60-Day 100% Money Back Guarantee!

In the unlikely event when the item doesn't meet your expectation, be sure to contact us within sixty (60) days. 

We want you to have plenty of time to feel absolutely certain that you have what you've paid for!

If you're not 100% happy simply let us know and return the item in original condition and packaging.

We will send you a full refund (excluding postage) promptly and courteously - No Questions Asked.

That means No Risk to You whatsoever!



BUT.... Make Sure You Act Quickly. 
We Have A Limited Number In Stock.
.. Get Yours Now While Stocks Last!



Simply Click The Add To Cart Button To Get Yours Now!



P.S.
  Remember when you shop with us, all your purchases come with our 60 Day No Nonsense Money Back Guarantee... No Questions Asked! Not 7 days, not 14 days, or even 30 days... You have TWO WHOLE MONTHS to be 100% sure you are happy with your purchase!

So you've got nothing to lose from buying right away.

P.P.S.  Act now to take advantage of our FREE BONUS of five personal emails to me (Shelley) for technical advice or anything sewing related. Hurry! Don't miss out...

We know sewing. But you know best.

Sometimes things don't work out according to plan. Not to worry - we have a 60 Day Money Back Guarantee to support you.

Your No-Nonsense 60 Day
100% Money Back Guarantee*

In the unlikely event when the item doesn't meet your expectation, be sure to contact us within sixty (60) days.

The benefits under this Guarantee are in addition to other rights and remedies under a law in relation to the product you have purchased.

We want you to have a plenty of time to feel absolutely certain that you have what you've paid for!

If you're not 100% happy simply let us know and return the item in original condition and packaging.

We'll send you a full refund (excluding postage) promptly and courteously - No Questions Asked.

So you can be sure you'll be happy with your purchases!

*Looking for the fine print? Check our terms and conditions for details.

Be The First To Review This Product!

Help other Sew Much Easier users shop smarter by writing reviews for products you have purchased.

Write a product review

Can't wait for it to arrive? We will get it to you ASAP.

Prompt Shipping - Your package will be sent promptly once payment is cleared. Usually it will be dispatched the next business day.

Combined Shipping - Want to save even more? We are happy to combine shipping for multiple items in your cart... it gets worked out when you check out.

Packaging and Sending - All your items will be packed well. We do everything we can to ensure your package arrives safely. In the unlikely event something does go wrong, simply contact us and we will do our best to resolve your concers.

Packaging Materials - We support "green policies" and recycle clean packaging where possible. Sometimes brand names on packaging may not necessarily match the content.

Simply click "Add to Cart" now and complete checkout so we can get it on it's way to you.

Would you like more information on this item?

Can we clarify anything else for you at all?


Please feel free to use the form below, or email hello@sewmucheasier.com or phone 1300 88 11 59.

Your message will be responded to ASAP, usually within 24 hours during business hours, Monday to Friday 9am to 5pm Australian Eastern Standard time.

 


Sew Much Easier Contact

Got a question? We're happy to help! Drop us a line below or call from Australia on 1300 88 11 59

 


In Stock
AU $79.99
SAVE AU $10.00 (12%)
AU $69.99
or 4 payments of AU $17.50 learn more